New Report on Asia Pacific Market for Dental Prosthetics and CAD/CAM Devices
The Asia-Pacific market includes Japan, South Korea and Australia. The aging population and demand for superior dental aesthetics will drive the dental prosthetics market over the 2011-2018 forecast periods.
Australia has increasingly been affected by the outsourcing of dental prosthetics, while Japan continues to be affected by some level of economic uncertainty. However, the increasing penetration rate of CAD/CAM technology will offset each of these effects and increasingly drive the dental prosthetics market. Report Includes: Competitor Analysis: We provide a detailed analysis of the competitive landscape including market shares and qualitative discussions of the leading and upcoming competitors in each market segment. Identify Strategic Opportunities, Customer Feedback and Market Monitoring, Market Overview by Segment & Country, Trend Analysis by Segment & Country, Market Drivers & Limiters, Mergers & Acqusitions.
Segments included: TISSUE HEART VALVE,MECHANICAL HEART VALVE,ANNULOPLASTY REPAIR DEVICE,ON-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,OFF-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,ENDOSCOPIC VESSEL HARVESTING DEVICE,ANASTOMOSIS ASSIST DEVICE,CARDIAC ABLATION DEVICE,VENTRICULAR ASSIST DEVICE,INTRA-AORTIC BALLOON PUMP DEVICE, ARTIFICIAL HEART DEVICE, PFO AND ATRIAL AND SEPTAL DEFECT REPAIR DEVICE
TABLE OF CONTENTS I
LIST OF FIGURES VI
LIST OF CHARTS IX
EXECUTIVE SUMMARY 1
1.1 ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS 1
1.2 CAD/CAM PROSTHETICS MARKET 2
1.3 CROWN AND BRIDGE 3
1.4 DENTURE 4
1.5 CAD/CAM SYSTEM 5
1.6 FULL IN-LAB CAD/CAMSYSTEM 6
1.7 STANDALONE CAD/CAMSCANNER 7
1.8 CHAIRSIDE SYSTEM 8
1.9 COMPETITIVE ANALYSIS 9
RESEARCH METHODOLOGY 10
2.1 RESEARCH SCOPE 10
2.2 IDATA'S 9-STEP METHODOLOGY 10
Step 1: Project Initiation & Team Selection 11
Step 2: Prepare Data Systems and Perform Secondary Research 13
Step 3: Preparation for Interviews & Questionnaire Design 14
Step 4: Performing Primary Research 15
Step 5: Research Analysis: Establishing Baseline Estimates 17
Step 6: Market Forecast and Analysis 18
Step 7: Identify Strategic Opportunities 20
Step 8: Final Review and Market Release 21
Step 9: Customer Feedback and Market Monitoring 21
INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM DEVICES 22
3.1 INTRODUCTION 22
3.2 CROWNS AND BRIDGES 23
3.2.1 Crowns 23
3.2.2 Bridges 23
3.2.3 Material Types 23
3.3 INLAY/ONLAYS 24
3.3.1 Material Types 24
3.4 VENEERS 25
3.4.1 Material Types 25
3.5 DENTURES 25
3.5.1 Full Dentures 25
3.5.2 Partial Dentures 26
3.6MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS 26
3.6.1 Conventional Fabrication 26
3.6.2 CAD/CAM Technology 26
3.6.3 Rapid Prototyping 27
3.6.4 Intra-Oral Digital Impression-Taking 27
3.7 CAD/CAM BLOCKS 28
ASIA-PACIFIC DENTAL AND CAD/CAM DEVICE MARKET 29
4.1 INTRODUCTION 29
4.2 CURRENCY EXCHANGE RATE 30
4.3MARKET ANALYSIS AND FORECAST 31
4.3.1 Dental Prosthetics 31
4.3.2 CAD/CAM Prosthetics 33
4.3.3 CAD/CAM System 35
4.3.4 CAD/CAM Block.37
4.4 TREND ANALYSIS BY SEGMENT 39
4.5MARKET DRIVERS AND LIMITERS 42
4.5.1 Market Drivers 42
4.5.2 Market Limiters 44
4.6MERGERS AND ACQUISITIONS 48
COUNTRY PROFILES 52
5.1 INTRODUCTION 52
5.1.1 Population 52
5.1.2 Median Age 52
5.1.3 GDP per Capita 52
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants 52
5.1.5 Price Index 53
5.1.6 Asia-Pacific Dental Prosthetics per Capita Summary 53
5.2 JAPAN.54
5.3 SOUTH KOREA 55
5.4 AUSTRALIA 56
5.5 DENTISTS PER POPULATION 57
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 58
6.1 INTRODUCTION 58
6.2MARKET ANALYSIS AND FORECAST 60
6.2.2 Crown and Bridge62
6.2.2.1 Porcelain-Fused Metal (PFM) Device 66
6.2.2.2 Full-Cast Device 68
6.2.2.3 All-Ceramic Device 70
6.2.2.4 Hard-Resin Device 72
6.2.3 CAD/CAM Prosthetics 74
6.2.3.1 Chairside CAD/CAM Prosthetics 76
6.2.3.2 In-Lab CAD/CAM Prosthetics 78
6.2.4 Denture 80
6.2.4.1 Full Denture 82
6.2.4.2 Partial Denture 82
6.2.5 CAD/CAM System Market 84
6.2.5.1 Full In-Lab CAD/CAM System 86
6.2.5.2 Standalone Scanner CAD/CAM System 88
6.2.5.3 Chairside CAD/CAM System Market 90
6.2.6 CAD/CAM Block Market.92
6.2.6.1 CAD/CAM Block Market by Material Type 94
6.3MARKET DRIVERS AND LIMITERS 98
6.3.1 Market Drivers 98
6.3.2 Market Limiters 100
6.4 COMPETITIVE ANALYSIS.104
6.4.1 CAD/CAM Prosthetics 104
6.4.2 CAD/CAM System 106
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 111
7.1 INTRODUCTION 111
7.2.2 Crown and Bridge 114
7.2.2.1 Porcelain-Fused Metal 118
7.2.2.2 Full-Cast 120
7.2.2.3 All-Ceramic.122
7.2.3 CAD/CAM Prosthetics 124
7.2.3.1 Chairside CAD/CAM Prosthetics 126
7.2.4 Denture Market 130
7.2.4.1 Full Denture 132
7.2.4.2 Partial Denture 132
7.2.5.2 Standalone Scanner CAM CADSystem 138
7.2.5.3 Chairside CAD/CAM System 140
7.3 CAD/CAM BLOCK MARKET 142
7.3.1.1 Zirconia 144
7.3.1.2 Porcelain 144
7.3.1.3 Acrylic 144
7.3.1.4 Metal 144
Buy your copy of this report @ [http://www.rnrmarketresearch.com/asia-pacific-market-for-dental-prosthetics-and-cadcam-devices-japan-australia-south-korea-market-report.html]
Contact: sales@rnrmarketresearch.com for further details.
Australia has increasingly been affected by the outsourcing of dental prosthetics, while Japan continues to be affected by some level of economic uncertainty. However, the increasing penetration rate of CAD/CAM technology will offset each of these effects and increasingly drive the dental prosthetics market. Report Includes: Competitor Analysis: We provide a detailed analysis of the competitive landscape including market shares and qualitative discussions of the leading and upcoming competitors in each market segment. Identify Strategic Opportunities, Customer Feedback and Market Monitoring, Market Overview by Segment & Country, Trend Analysis by Segment & Country, Market Drivers & Limiters, Mergers & Acqusitions.
Segments included: TISSUE HEART VALVE,MECHANICAL HEART VALVE,ANNULOPLASTY REPAIR DEVICE,ON-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,OFF-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,ENDOSCOPIC VESSEL HARVESTING DEVICE,ANASTOMOSIS ASSIST DEVICE,CARDIAC ABLATION DEVICE,VENTRICULAR ASSIST DEVICE,INTRA-AORTIC BALLOON PUMP DEVICE, ARTIFICIAL HEART DEVICE, PFO AND ATRIAL AND SEPTAL DEFECT REPAIR DEVICE
TABLE OF CONTENTS I
LIST OF FIGURES VI
LIST OF CHARTS IX
EXECUTIVE SUMMARY 1
1.1 ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS 1
1.2 CAD/CAM PROSTHETICS MARKET 2
1.3 CROWN AND BRIDGE 3
1.4 DENTURE 4
1.5 CAD/CAM SYSTEM 5
1.6 FULL IN-LAB CAD/CAMSYSTEM 6
1.7 STANDALONE CAD/CAMSCANNER 7
1.8 CHAIRSIDE SYSTEM 8
1.9 COMPETITIVE ANALYSIS 9
RESEARCH METHODOLOGY 10
2.1 RESEARCH SCOPE 10
2.2 IDATA'S 9-STEP METHODOLOGY 10
Step 1: Project Initiation & Team Selection 11
Step 2: Prepare Data Systems and Perform Secondary Research 13
Step 3: Preparation for Interviews & Questionnaire Design 14
Step 4: Performing Primary Research 15
Step 5: Research Analysis: Establishing Baseline Estimates 17
Step 6: Market Forecast and Analysis 18
Step 7: Identify Strategic Opportunities 20
Step 8: Final Review and Market Release 21
Step 9: Customer Feedback and Market Monitoring 21
INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM DEVICES 22
3.1 INTRODUCTION 22
3.2 CROWNS AND BRIDGES 23
3.2.1 Crowns 23
3.2.2 Bridges 23
3.2.3 Material Types 23
3.3 INLAY/ONLAYS 24
3.3.1 Material Types 24
3.4 VENEERS 25
3.4.1 Material Types 25
3.5 DENTURES 25
3.5.1 Full Dentures 25
3.5.2 Partial Dentures 26
3.6MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS 26
3.6.1 Conventional Fabrication 26
3.6.2 CAD/CAM Technology 26
3.6.3 Rapid Prototyping 27
3.6.4 Intra-Oral Digital Impression-Taking 27
3.7 CAD/CAM BLOCKS 28
ASIA-PACIFIC DENTAL AND CAD/CAM DEVICE MARKET 29
4.1 INTRODUCTION 29
4.2 CURRENCY EXCHANGE RATE 30
4.3MARKET ANALYSIS AND FORECAST 31
4.3.1 Dental Prosthetics 31
4.3.2 CAD/CAM Prosthetics 33
4.3.3 CAD/CAM System 35
4.3.4 CAD/CAM Block.37
4.4 TREND ANALYSIS BY SEGMENT 39
4.5MARKET DRIVERS AND LIMITERS 42
4.5.1 Market Drivers 42
4.5.2 Market Limiters 44
4.6MERGERS AND ACQUISITIONS 48
COUNTRY PROFILES 52
5.1 INTRODUCTION 52
5.1.1 Population 52
5.1.2 Median Age 52
5.1.3 GDP per Capita 52
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants 52
5.1.5 Price Index 53
5.1.6 Asia-Pacific Dental Prosthetics per Capita Summary 53
5.2 JAPAN.54
5.3 SOUTH KOREA 55
5.4 AUSTRALIA 56
5.5 DENTISTS PER POPULATION 57
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 58
6.1 INTRODUCTION 58
6.2MARKET ANALYSIS AND FORECAST 60
6.2.2 Crown and Bridge62
6.2.2.1 Porcelain-Fused Metal (PFM) Device 66
6.2.2.2 Full-Cast Device 68
6.2.2.3 All-Ceramic Device 70
6.2.2.4 Hard-Resin Device 72
6.2.3 CAD/CAM Prosthetics 74
6.2.3.1 Chairside CAD/CAM Prosthetics 76
6.2.3.2 In-Lab CAD/CAM Prosthetics 78
6.2.4 Denture 80
6.2.4.1 Full Denture 82
6.2.4.2 Partial Denture 82
6.2.5 CAD/CAM System Market 84
6.2.5.1 Full In-Lab CAD/CAM System 86
6.2.5.2 Standalone Scanner CAD/CAM System 88
6.2.5.3 Chairside CAD/CAM System Market 90
6.2.6 CAD/CAM Block Market.92
6.2.6.1 CAD/CAM Block Market by Material Type 94
6.3MARKET DRIVERS AND LIMITERS 98
6.3.1 Market Drivers 98
6.3.2 Market Limiters 100
6.4 COMPETITIVE ANALYSIS.104
6.4.1 CAD/CAM Prosthetics 104
6.4.2 CAD/CAM System 106
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 111
7.1 INTRODUCTION 111
7.2.2 Crown and Bridge 114
7.2.2.1 Porcelain-Fused Metal 118
7.2.2.2 Full-Cast 120
7.2.2.3 All-Ceramic.122
7.2.3 CAD/CAM Prosthetics 124
7.2.3.1 Chairside CAD/CAM Prosthetics 126
7.2.4 Denture Market 130
7.2.4.1 Full Denture 132
7.2.4.2 Partial Denture 132
7.2.5.2 Standalone Scanner CAM CADSystem 138
7.2.5.3 Chairside CAD/CAM System 140
7.3 CAD/CAM BLOCK MARKET 142
7.3.1.1 Zirconia 144
7.3.1.2 Porcelain 144
7.3.1.3 Acrylic 144
7.3.1.4 Metal 144
Buy your copy of this report @ [http://www.rnrmarketresearch.com/asia-pacific-market-for-dental-prosthetics-and-cadcam-devices-japan-australia-south-korea-market-report.html]
Contact: sales@rnrmarketresearch.com for further details.
Source...