DIY Necklace Tree
- 1). Attach the square wooden post to the center of the square of plywood using a nail and wood glue. Allow the wood glue to dry before moving to the next step.
- 2). Measure and mark 1 inch down from the top on one side of the post, 3 inches down on another side, 5 inches down on yet another side and 7 inches down on the final side.
- 3). Drill a hole a 1/2 inch deep at the marks you just made.
- 4). Coat the inside of the holes with wood glue and insert a dowel into each hole.
- 5). Drill a 1/2-inch-deep hole in each of your wooden knobs.
- 6). Coat the inside of the hole on each knob with wood glue and slide one knob on the end of each dowel.
- 7). When the wood glue has dried, place your necklaces on the branches of your tree necklace, with the longest necklaces on the top branch and the shortest on the bottom.
Source...